MWLyon
 
 
 

Design Work Completed

>Prototyping
 
>Schematic Capture
 
>PCB Layout
 
>Initial Fabrication

1999
6 Output Pulse and Video Distribution Amplifier
 
VDA1x6 Board top view
 

VDA1X6 - 6 Output Pulse and Video Distribution Amplifier

> DIFFERENTIAL GAIN – 0.03%
> DIFFERENTIAL PHASE – 0.05 DEGREE
> 50MHz –3 dB BANDWIDTH
> SLEW RATE – 1000V/uS
> DC COUPLED
> WIDE SUPPLY RANGE – +5V/-5V to +15V/-15V
> SMALL SIZE – 2.0" X 2.2"

The VDA1X6 module is a pulse and video DA based on the
Elantec EL2099CT integrated circuit.

With a supply voltage of +15V/-15V, this module can
drive six coaxial cables terminated in 75 Ohms to +11V/-11V.

With a supply voltage of +5V/-5V, this module can
drive six coaxial cables terminated in 75 Ohms to +3V/-3V.

When being driven by a 75 Ohm source and driving 75 Ohm
terminations the gain of the module is unity.

The VDA1X6 module may be mounted in a chassis with a power supply to form a stand-alone application, mounted in an existing piece of equipment to extend it’s output capabilities, or used in conjunction with other Lyon Development modules to form a custom device.

This product is no longer sold due to the discontinuance of it's DA chip, the Elantec EL2099CT.